PTFE solid belt with joint

PTFE solid belt with joint
PTFE solid belt with joint
PTFE solid belt with joint

PTFE belt with joint is including PTFE glass belt and PTFE kevlar belt, relative to PTFE endless belt, PTFE belt with joint can made into any sizes and is cost-effective.For the belt edge, PTFE film, PTFE glass edge or PTFE kevlar edge can be chosen.For the belt joint, you have following choices.

  • Butt: This splices are heat sealed on the back side of belts, offering a smooth top surface.
  • Overlap: Overlap splices are the most popular joint style in many industries, and it can be enhanced for food processing industry, the length of overlap is ranging from 25 mm to 152 mm, with directional belt angles of 30, 45, 60, and 90 degrees
  • Clipper: Clipper is a metal lacing. This strong and extremely flexible splice conforms well to smaller diameter pulleys
  • Alligator: Alligator splices offer exceptionally strong metal lacing. These are recommended for use with 127 mm diameter, or larger pulleys.
  • Castellated: Castellated Seal splices are flexible and can be reinforced with stitching for extra strength. Use Castellated Seal splices where metal is undesirable.
  • Finger: The ends will be cut into toothed shape, by jointing the two ends, the splice looks like finger, and this toothed shape can be customize in order to increase the tensile strength.
  • Cover Flap: covers Clipper or Alligator splice metal lacing, providing a continuous release surface.
PTFE Belt with Joint
Belt Material PTFE glass fabric PTFE Kevlar fabric
Belt Joint Butt Overlap Clipper Alligator Castellated Finger
Belt Edge PTFE glass edge PTFE film edge PTFE Kevlar edge
Belt Guide PTFE guide Kevlar guide Silicone guide
Belt Pin Stainless Steel Pin PTFE Pin Alligator Pin

PTFE Mesh Belts

TFE Mesh Conveyor Belts including PTFE glass mesh and PTFE Kevlar mesh, the mesh size is ranging from 1×1, 2×2.5, 2×4, 4×4, 6×6, 8×8 to 10×10. The maximum width of belt is 4100mm, this belt can continuously working below 500F.

The PTFE mesh series is as follows.

  • Single weft series
  • Double weft series
  • Anti-static series
  • Stronger yarn series
  • Kevlar series

Applications

近期文章

PTFE Mesh Belt
Belt Material PTFE glass fabric PTFE Kevlar fabric
Belt Joint Bullnose Alligator Plastic
Belt Edge PTFE glass edge PTFE film edge PTFE Kevlar edge
Belt Guide PTFE guide Kevlar guide Silicone guide
Belt Pin Stainless Steel Pin PTFE Pin Alligator Pin

PTFE Endless Belt

PTFE Endless Belt is using high tensile fiberglass or Kevlar as basic material (has no joint), this endless belt is woven by special weaving equipment and coated with high quality Teflon. Compared with the PTFE belt with joints, it overcomes the phenomenon of easy fracture at the interface joint of the conveyor belt in the past and has better bending fatigue resistance and durability.

Standard thickness : 0.35mm – 0.55mm

Surface                      : Normal or Anti-static

Maximum width     :  1600mm

Standard length is as follows:

Standard Length of PTFE Endless Belt
1360 1380 1440 1470 1510 1520 1530 1540
1580 1600 1640 1660 1680 1730 1740 1780
1840 1850 1870 1880 1950 2000 2040 2100
2250 2310 2320 2420 2440 2450 2500 2600
2800 2820 2850 2880 2900 3050 3080 3090
3540 3590 3820 3850 3890 3900 3920 3930
5100 5270 5400 5640 5800 6000 6440 6700

PTFE Laminated Belt

PTFE Laminated Belt is laminated by 2 layers of PTFE coated fabric, the normal material is 2 ply of 0.08mm, 0.11mm, 0.13mm PTFE fabric and others, this fabric can be standard brown or anti-static black.

The maximum width for laminated belt is 300mm, overlap joint or finger joint is available.

ESONE can also offer holes punching service, resulting in a laminated belt (Tabber Stringer Belt) with a excellent surface.

Contact Us Now!