Esone

PTFE Coated Fabrics Release Peel Ply 3mil

PTFE Coated Fabrics Release Peel Ply 3mil with high PTFE content to reduce mark-off, makes this the perfect choice for professional applications like compression molding, and autoclave. 

The use of PTFE Release Peel Ply offers an efficient way to achieve the perfect peel for any resin system, with no need to spend time hand finishing. This product can be used multiple times to help reduce the number of consumable materials needed and time spent on cutting.
This PTFE-coated fabric is a great choice when there’s no need for bleeding or breathing resin from your composite lay-up. It leaves little to none of the material imprints on most surfaces, so you can be sure that it won’t interact negatively with other components in use!
The PTFE coated fabrics are designed to release peel ply during cure, which will tend to hold all of the resin inside the composite matrix. The composite parts have a high gloss sheen and will tend to retain resin from the previous layer, resulting in an extremely slippery surface. PTFE Coated Fabrics Release Peel Ply is usually used with vacuum bagging prepreg so you can control the resin content in your parts. Since it won’t allow any other resin to pass through, you don’t need to worry about using this type in our infusion process!
ptfe coated fabrics for vacuum bagging prepreg
ptfe coated fabrics for vacuum bagging prepreg

Properties and Advantages:

1. High-Temperature resistance

Compared with Teflon Adhesive Tape which is made with silicone adhesive(max temperature resistance 260°c) on the back side, this Nonadhesive PTFE Coated Fabrics can withstand continuous exposure from -72°C all the way up past +360 °c, meaning it will never break or peel! It also handles short-term spikes as high as 400 degrees without any issue whatsoever.

2. Nonstick release surface

This Teflon fabric is designed with a special PTFE coating to have very low friction and excellent release properties. The surface has little or no energy which ensures it’ll naturally reject adhesion from extra elements.

3. Dimensional Stability

The material in this PTFE Coated Fabrics is superior to other films due to its raw woven glass fibers which give it exceptional strength. Even when stretched, handled roughly, or damaged by chemicals -the wrap won’t break easily.

4. Good heat transfer

The ideal release peel ply should be able to transfer heat quickly and efficiently to save energy. Esone provides a product of 0.08mm/3mil which finds the best balance between thickness and heat transfer.

Specifications of PTFE Coated Fabrics Release Peel Ply

TDS of PREMIUM SERIE  YS9008AJ
Product Product Category Coating
PTFE GLASS FABRIC PREMIUM SERIE PTFE(TEFLON)
Properties Metric Imperial
Basic fabric 1080 1080
Standard width                                           Please ask for other widths 1000, 1250 mm 39.5, 49.3 inches
Thickness 0.075 mm 0.003 inches
Coated weight 146 g/m² 4.3 oz/yd²
PTFE content 67% 67%
Tensile strength (747/637) N/5cm (85/72.5) lbs/inches
Tear strength (15/12) N (3.4/2.7) lbs
Temperature resistance x-70 to +260 °C x-100 to 500 °F

 

Print Friendly, PDF & Email
esone certificate
esone team

Request A Quote

× How can I help you?

Apply Here to Get A Free Sample

Totally free and valuable

Save your time of sourcing

A sample book of frequently needed materials

Updated technical data and prices

Apply Here to Get A Free Sample

Totally free and valuable

Save your time of sourcing

A sample book of frequently needed materials

Updated technical data and prices